>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
I was going to say there’s a not-drinking problem here, but I’m not the one pointing fingers.
- This STL file is recommended for FDM Printers and Resin Printers!
- Approximately Height: 6,5 cm
3D PRINT ASSEMBLY
- Insert the middle ring before gluing the top and bottom pieces together. Cover the bottom of the spinner in EVA foam so it doesn’t slide through the table when you spin.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
I was going to say there’s a not-drinking problem here, but I’m not the one pointing fingers.
- This STL file is recommended for FDM Printers and Resin Printers!
- Approximately Height: 6,5 cm
3D PRINT ASSEMBLY
- Insert the middle ring before gluing the top and bottom pieces together. Cover the bottom of the spinner in EVA foam so it doesn’t slide through the table when you spin.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
Recently viewed products
