>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Grinch Christmas Tree | HueForge Filament Painting | 3D Printer Model File
- This STL file is recommended for FDM Printers!
Nozzle: 0.4
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Can be used in the following combinations:
- Half Christmas tree with Grinch filament painting
- Grinch filament painting only, as wall decoration
- Join 2 half's of the Christmas tree model to make a full Christmas tree
As usual, print the Filament Painting part with 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Use the same model with the following colors:
Filaments Used:
PLA Overture Black
PLA PolyTerra Charcoal Black
PLA Ziro Translucent Green
PLA Ziro Fluo Green
PLA+ eSun Green
PLA Overture White
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Charcoal Black
At layer #10 (0.88mm) swap to Translucent Green
At layer #21 (1.76mm) swap to Fluo Green
At layer #26 (2.16mm) swap to eSun Green
At layer #28 (2.32mm) swap to White for the rest.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Recommended Layer Height: 0.08 mm
- Recommended Base Layer Height: 0.16 mm
- Recommended Infill (%): 100% Infill
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Grinch Christmas Tree | HueForge Filament Painting | 3D Printer Model File
- This STL file is recommended for FDM Printers!
Nozzle: 0.4
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Can be used in the following combinations:
- Half Christmas tree with Grinch filament painting
- Grinch filament painting only, as wall decoration
- Join 2 half's of the Christmas tree model to make a full Christmas tree
As usual, print the Filament Painting part with 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Use the same model with the following colors:
Filaments Used:
PLA Overture Black
PLA PolyTerra Charcoal Black
PLA Ziro Translucent Green
PLA Ziro Fluo Green
PLA+ eSun Green
PLA Overture White
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Charcoal Black
At layer #10 (0.88mm) swap to Translucent Green
At layer #21 (1.76mm) swap to Fluo Green
At layer #26 (2.16mm) swap to eSun Green
At layer #28 (2.32mm) swap to White for the rest.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Recommended Layer Height: 0.08 mm
- Recommended Base Layer Height: 0.16 mm
- Recommended Infill (%): 100% Infill
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
Recently viewed products
