>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: 3MF
3D MODEL DESCRIPTION
Mickey Mouse Elvis Presley | HueForge 3D Filament Painting Model File
- This STL file is recommended for FDM Printers!
Nozzle: 0.4
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Gray
At layer #9 (0.8mm) swap to Jade White
At layer #16 (1.36mm) swap to Charcoal
At layer #18 (1.52mm) swap to Mandarin Orange
At layer #23 (1.92mm) swap to Lemon Yellow for the rest.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Recommended Layer Height: 0.08 mm
- Recommended Base Layer Height: 0.16 mm
- Recommended Infill (%): 100% Infill
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: 3MF
3D MODEL DESCRIPTION
Mickey Mouse Elvis Presley | HueForge 3D Filament Painting Model File
- This STL file is recommended for FDM Printers!
Nozzle: 0.4
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Gray
At layer #9 (0.8mm) swap to Jade White
At layer #16 (1.36mm) swap to Charcoal
At layer #18 (1.52mm) swap to Mandarin Orange
At layer #23 (1.92mm) swap to Lemon Yellow for the rest.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Recommended Layer Height: 0.08 mm
- Recommended Base Layer Height: 0.16 mm
- Recommended Infill (%): 100% Infill
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
Recently viewed products
