>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
Samurais are timeless when it comes to style and finesse.
- This STL file is recommended for FDM Printers!
-
Approximately Height: 102 cm
In order to assembly this print you will need the materials below:
LED Stripe NEON (Amazon)
LED Stripe NEON (Aliexpress)
Switch on/off - Toggle Switch (Amazon)
Switch on/off - Toggle Switch (Aliexpress)
Solder
Soldering Iron
Electric Wire
Electrical Tape
Battery Case 9V
Double Sided Tape
3D TECHNICAL OVERVIEW
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes. (Use supports on the blade light cover)
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
Samurais are timeless when it comes to style and finesse.
- This STL file is recommended for FDM Printers!
-
Approximately Height: 102 cm
In order to assembly this print you will need the materials below:
LED Stripe NEON (Amazon)
LED Stripe NEON (Aliexpress)
Switch on/off - Toggle Switch (Amazon)
Switch on/off - Toggle Switch (Aliexpress)
Solder
Soldering Iron
Electric Wire
Electrical Tape
Battery Case 9V
Double Sided Tape
3D TECHNICAL OVERVIEW
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes. (Use supports on the blade light cover)
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
Recently viewed products
