>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: 3MF
3D MODEL DESCRIPTION
Elvis and Friends at Bar | HueForge 3D Filament Painting Model File
- This STL file is recommended for FDM Printers!
Nozzle: 0.4
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Gray Transmission Distance: 3
PLA BambuLab Basic Black Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 8
PLA BambuLab Basic White Transmission Distance: 8.2
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Gray
At layer #4 (0.4mm) swap to Black
At layer #8 (0.72mm) swap to Red
At layer #9 (0.8mm) swap to White
At layer #11 (0.96mm) swap to White for the rest.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Recommended Layer Height: 0.08 mm
- Recommended Base Layer Height: 0.16 mm
- Recommended Infill (%): 100% Infill
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.