>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: 3MF
3D MODEL DESCRIPTION
TWRP Band | HueForge 3D Filament Painting
- This STL file is recommended for FDM Printers!
Nozzle: 0.4
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Overture Space Gray Transmission Distance: 2.1
PLA PolyLite Polymaker Teal Transmission Distance: 0.5
PLA PolyLite White Transmission Distance: 5
PLA PolyLite Yellow Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Space Gray
At layer #10 (0.88mm) swap to Polymaker Teal
At layer #11 (0.96mm) swap to White
At layer #13 (1.12mm) swap to Yellow for the rest.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Recommended Layer Height: 0.08 mm
- Recommended Base Layer Height: 0.16 mm
- Recommended Infill (%): 100% Infill
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: 3MF
3D MODEL DESCRIPTION
TWRP Band | HueForge 3D Filament Painting
- This STL file is recommended for FDM Printers!
Nozzle: 0.4
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Overture Space Gray Transmission Distance: 2.1
PLA PolyLite Polymaker Teal Transmission Distance: 0.5
PLA PolyLite White Transmission Distance: 5
PLA PolyLite Yellow Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Space Gray
At layer #10 (0.88mm) swap to Polymaker Teal
At layer #11 (0.96mm) swap to White
At layer #13 (1.12mm) swap to Yellow for the rest.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Recommended Layer Height: 0.08 mm
- Recommended Base Layer Height: 0.16 mm
- Recommended Infill (%): 100% Infill
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
