>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: OBJ
3D MODEL DESCRIPTION
Wukong | Incense Holder | 3D Printer Model Files
For the incense burner, We recommend placing a large washer (link below) in the top bowl. The washer must have a hole and some distance to the bottom so that the incense burner can release the smoke downwards into the bowl.
***Please do not leave the object alone when the incense burner is lit.***
Ceramic Spacer/Washer 6.5x24x9
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: OBJ
3D MODEL DESCRIPTION
Wukong | Incense Holder | 3D Printer Model Files
For the incense burner, We recommend placing a large washer (link below) in the top bowl. The washer must have a hole and some distance to the bottom so that the incense burner can release the smoke downwards into the bowl.
***Please do not leave the object alone when the incense burner is lit.***
Ceramic Spacer/Washer 6.5x24x9
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
