>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D PRINT MODEL DESCRIPTION
Pegasus Wall Night Light | 3D Printer Model Files
Ride to the realm of dreams on the world’s greatest stallion light!
Your Wall Light requires some assembly.
What you’ll need:
Solder
Soldering Iron
- This STL file is recommended for FDM Printers!
-
Approximately Height : 12,3 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
-
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: We have printed ours without supports (note that if you choose to print this way, the inside of your print will have poor finishing. You can always use supports to make your print better)
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D PRINT MODEL DESCRIPTION
Pegasus Wall Night Light | 3D Printer Model Files
Ride to the realm of dreams on the world’s greatest stallion light!
Your Wall Light requires some assembly.
What you’ll need:
Solder
Soldering Iron
- This STL file is recommended for FDM Printers!
-
Approximately Height : 12,3 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
-
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: We have printed ours without supports (note that if you choose to print this way, the inside of your print will have poor finishing. You can always use supports to make your print better)
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
Recently viewed products
