Skull Wall Night Light | 3D Printer Model Files

Your Price:

$18.73 $50.00

You Save: $31.27 63%

Only 13 left! 5 people are viewing this, and 16 recently purchased it

16 People have recently bought this

Days

Hours

Minutes

Seconds

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<

File Type: STL

3D PRINT MODEL DESCRIPTION

Skull Wall Night Light | 3D Printer Model Files

Your Wall Light requires some assembly.

What you’ll need:

LAMP SOCKET: Alliexpress / Amazon

FIRST FIT THE LAMP SOCKET WITH THE PRINTED SUPPORT INTO THE OUTLET, THEN FIT THE SKULL INTO THE SUPPORT.

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
Recommended Initial Layer Height: 0.20 mm
Recommended Layer Height: 0.20 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: We have printed ours without supports (note that if you choose to print this way, the inside of your print will have poor finishing. You can always use supports to make your print better)
Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Shipping

This item ships to

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<

File Type: STL

3D PRINT MODEL DESCRIPTION

Skull Wall Night Light | 3D Printer Model Files

Your Wall Light requires some assembly.

What you’ll need:

LAMP SOCKET: Alliexpress / Amazon

FIRST FIT THE LAMP SOCKET WITH THE PRINTED SUPPORT INTO THE OUTLET, THEN FIT THE SKULL INTO THE SUPPORT.

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
Recommended Initial Layer Height: 0.20 mm
Recommended Layer Height: 0.20 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: We have printed ours without supports (note that if you choose to print this way, the inside of your print will have poor finishing. You can always use supports to make your print better)
Build Plate Adhesion: Skirt.