>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF Color
R2D2 | Star Wars | Maze Locking Container | Best 3D Printing Model Files
Assembly
Just push the feet onto the arms and center leg, then push the arms onto the shoulder joints. Quite a bit of force may be needed depending on the tolerances of your printer.
Make sure to put the correct feet on the correct parts as they will be very hard to remove once snapped into place. If you're planning on priming and painting the model, do it before assembling it.
- This file is recommended for FDM Printers!
- Approximate Size: Can be resized to any size.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: yes
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF Color
R2D2 | Star Wars | Maze Locking Container | Best 3D Printing Model Files
Assembly
Just push the feet onto the arms and center leg, then push the arms onto the shoulder joints. Quite a bit of force may be needed depending on the tolerances of your printer.
Make sure to put the correct feet on the correct parts as they will be very hard to remove once snapped into place. If you're planning on priming and painting the model, do it before assembling it.
- This file is recommended for FDM Printers!
- Approximate Size: Can be resized to any size.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: yes
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
