>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Titanic | Humidifier | Best 3D Printing Model Files
Features
- ⚡ No electrical knowledge required – just connect the USB atomizer module.
- 🔌 Plug and Play – works straight away once assembled.
- 🧲 Magnetic closure with 5 mm x 2 mm magnets for easy refill and maintenance.
- 💧 Internal max fill marking to prevent spills or overfilling.
- 🖨️ Includes AMS & No-AMS print profiles for flexibility.
- ⏱️ Quick build – complete within 30 minutes.
This build uses an affordable DIY misting kit: 👉 USB Mini Humidifier Atomizer Kit – only $3.76
3D PRINT FILE SETTINGS
NOTE: You can print this Planter Water Tight with PLA with the following settings:
Layer Walls: 7
Parameters: 7
Top/bottom: 7
Nozzle Temp: Increase by 10 from normal max temp for filament.
Extrusion Multiplier: Increase by 10% of default value.
Layer Height: 0.15mm
Overlap: 35%
Infill: 15% is fine as long as parameter is 7.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Titanic | Humidifier | Best 3D Printing Model Files
Features
- ⚡ No electrical knowledge required – just connect the USB atomizer module.
- 🔌 Plug and Play – works straight away once assembled.
- 🧲 Magnetic closure with 5 mm x 2 mm magnets for easy refill and maintenance.
- 💧 Internal max fill marking to prevent spills or overfilling.
- 🖨️ Includes AMS & No-AMS print profiles for flexibility.
- ⏱️ Quick build – complete within 30 minutes.
This build uses an affordable DIY misting kit: 👉 USB Mini Humidifier Atomizer Kit – only $3.76
3D PRINT FILE SETTINGS
NOTE: You can print this Planter Water Tight with PLA with the following settings:
Layer Walls: 7
Parameters: 7
Top/bottom: 7
Nozzle Temp: Increase by 10 from normal max temp for filament.
Extrusion Multiplier: Increase by 10% of default value.
Layer Height: 0.15mm
Overlap: 35%
Infill: 15% is fine as long as parameter is 7.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
Shipping
| Shipping | This item ships to |
