>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
The capital of Spain not only offers good calamari sandwiches and high spirited music, but it’s also a lovely decor for your house.
This model uses data from OpenStreetMap, which comes under the Open Database License. This means that whenever you display or sell your prints, you have the obligation of displaying that it comes from OpenStreetMap.
- This STL file is recommended for FDM Printers!
-
Approximately Dimensions: 15 cm - Big
9,5 cm - Small
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Top Layers: 7
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
The capital of Spain not only offers good calamari sandwiches and high spirited music, but it’s also a lovely decor for your house.
This model uses data from OpenStreetMap, which comes under the Open Database License. This means that whenever you display or sell your prints, you have the obligation of displaying that it comes from OpenStreetMap.
- This STL file is recommended for FDM Printers!
-
Approximately Dimensions: 15 cm - Big
9,5 cm - Small
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Top Layers: 7
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
