>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Baby Deadpool Beverage Container with Straw Hole | Popcorn Bucket | 3D Printer Model Files
Snack like a superhero with this Deadpool & Wolverine: Babypool Cup & Bucket Combo, a drink and popcorn container in one!
Bring home Babypool featured in a theater chair.
- This STL file is recommended for FDM Printers!
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
The bellow settings are VERY important for the Drink Container compartment to not leak. No special Filament needed. Just regular PLA with these settings. Enjoy
- You can print this Water Tight with PLA with the following settings:
Layer Walls: 7
Parameters: 7
Top/bottom: 7
Nozzle Temp: Increase by 10 from normal max temp for filament.
Extrusion Multiplier: Increase by 10% of default value.
Layer Height: 0.15mm
Overlap: 35%
Infill: 15% is fine as long as parameter is 7.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Baby Deadpool Beverage Container with Straw Hole | Popcorn Bucket | 3D Printer Model Files
Snack like a superhero with this Deadpool & Wolverine: Babypool Cup & Bucket Combo, a drink and popcorn container in one!
Bring home Babypool featured in a theater chair.
- This STL file is recommended for FDM Printers!
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
The bellow settings are VERY important for the Drink Container compartment to not leak. No special Filament needed. Just regular PLA with these settings. Enjoy
- You can print this Water Tight with PLA with the following settings:
Layer Walls: 7
Parameters: 7
Top/bottom: 7
Nozzle Temp: Increase by 10 from normal max temp for filament.
Extrusion Multiplier: Increase by 10% of default value.
Layer Height: 0.15mm
Overlap: 35%
Infill: 15% is fine as long as parameter is 7.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
