Your Cart ()
cload

GUARANTEED SAFE & SECURE CHECKOUT

Dinosaur Egg Wall Night Light | 3D Printer Model Files

Your Price:
$18.73 $50.00
You Save: $31.27 63%
Add to wishlist
Checkout Secure
Only 3 left! .. people are viewing this, and 3 recently purchased it
3 People have recently bought this

Hurry, Offer Ends in:

0
Days
0
Hours
0
Minutes
0
Seconds
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D PRINT MODEL DESCRIPTION
 
Dinosaur Egg Wall Night Light
 
Your Wall Light requires some assembly.  
What you’ll need: 
Solder 
Soldering Iron 
  • This STL file is recommended for FDM Printers!
  • Approximately Height :  12,3 cm
     
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
  • Line Width/ Nozzle: 0.4 mm
  • First Layer Line Width: 0.48 mm / 120%
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) 
  • Recommended Initial Layer Height:  0.20 mm
  • Recommended Layer Height:  0.20 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: We have printed ours without supports (note that if you choose to print this way, the inside of your print will have poor finishing. You can always use supports to make your print better)
  • Build Plate Adhesion: Skirt.
 
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping This item ships to

Description

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D PRINT MODEL DESCRIPTION
 
Dinosaur Egg Wall Night Light
 
Your Wall Light requires some assembly.  
What you’ll need: 
Solder 
Soldering Iron 
  • This STL file is recommended for FDM Printers!
  • Approximately Height :  12,3 cm
     
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
  • Line Width/ Nozzle: 0.4 mm
  • First Layer Line Width: 0.48 mm / 120%
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) 
  • Recommended Initial Layer Height:  0.20 mm
  • Recommended Layer Height:  0.20 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: We have printed ours without supports (note that if you choose to print this way, the inside of your print will have poor finishing. You can always use supports to make your print better)
  • Build Plate Adhesion: Skirt.
 
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Shipping

Shipping This item ships to
Dinosaur Egg Wall Night Light | 3D Printer Model Files

Dinosaur Egg Wall Night Light | 3D Printer Model Files

$18.73 $50.00
Add to wishlist
Dinosaur Egg Wall Night Light | 3D Printer Model Files

Dinosaur Egg Wall Night Light | 3D Printer Model Files

Your Price:
$18.73 $50.00
You Save: $31.27 63%
Truth Social
3 visitors right now
3 visitors have this item in their cart right now
3 people have bought this item
3 % of people buy 2 or more

Recently viewed products

Liquid error (layout/theme line 341): Could not find asset snippets/th-product-review.liquid