>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Doctor Doom | Helmet Mask v2 | Prop Cosplay | 3D Printing Models
A1mini is not supported.
If you need to light up the eyes, you'll need to use these kits:
LED Strip KA007 x2
Battery ZC003
1 to 2 Adapter ZH090
ZH1.5 to SH1.0 Conversion Wire XC007
Everything is pre-supported and can be printed directly.
PETG and PLA can be used without any difference. Please remove the mouth support carefully and avoid excessive force.
A long stick with a length of 182mm and a ratio of 100% is preset in the profile, you can scale it according to your width between the ears and synchronize it to the other parts, but you will definitely need glue to fix the kit after scaling.
About Assembly:
Connect all the kits first, then assemble them as shown below, paying attention to the orientation of all kits. All slots are optimized according to the kits, no glue is needed, but since the LED strip is too thin and needs to be shaded, it must be attached with black tape:
About Color:
If you don't install the LED, the mask can be printed directly in silver, if you install a light, it is recommended to print it with dark gray or black filaments and then spray it in silver since the light filaments will be translucent.
Transparent green is fine for the eyes according to the original settings, but I've tried transparent red and transparent orange and they both work well.
- This STL file is recommended for FDM Printers!
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Doctor Doom | Helmet Mask v2 | Prop Cosplay | 3D Printing Models
A1mini is not supported.
If you need to light up the eyes, you'll need to use these kits:
LED Strip KA007 x2
Battery ZC003
1 to 2 Adapter ZH090
ZH1.5 to SH1.0 Conversion Wire XC007
Everything is pre-supported and can be printed directly.
PETG and PLA can be used without any difference. Please remove the mouth support carefully and avoid excessive force.
A long stick with a length of 182mm and a ratio of 100% is preset in the profile, you can scale it according to your width between the ears and synchronize it to the other parts, but you will definitely need glue to fix the kit after scaling.
About Assembly:
Connect all the kits first, then assemble them as shown below, paying attention to the orientation of all kits. All slots are optimized according to the kits, no glue is needed, but since the LED strip is too thin and needs to be shaded, it must be attached with black tape:
About Color:
If you don't install the LED, the mask can be printed directly in silver, if you install a light, it is recommended to print it with dark gray or black filaments and then spray it in silver since the light filaments will be translucent.
Transparent green is fine for the eyes according to the original settings, but I've tried transparent red and transparent orange and they both work well.
- This STL file is recommended for FDM Printers!
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
