>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Ghost Rider | Photo Filament Painting | 3D Printer Model File
- This STL file is recommended for FDM Printers!
- It can be printed safely without AMS and on any printer.
NOTE: Please DO NOT change the size of this model—especially not to a smaller scale—as it may lose important details and won’t print as intended.
It was created using a filament painting technique called HueForge. These STL Filament Paintings are carefully optimized for specific nozzle sizes and layer heights, so shrinking them can affect the final print quality.
Print Infill 100%
Layer Height 0.08mm
Base Layer 0.16mm
Model Size: 180x180mm
Nozzle: 0.4
NOTE: You may print at higher layer heights below the Min Depth of 0.24mm. The Max Depth is 2mm and the Actual Depth is 2.1mm
Filaments Used:
Charcoal Transmission Distance: 0.1
Silver Transmission Distance: 0.7
White Transmission Distance: 1.7
Red Transmission Distance: 1.8
Yellow Transmission Distance: 5
Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Silver
At layer #10 (0.88mm) swap to White
At layer #13 (1.12mm) swap to Charcoal
At layer #18 (1.52mm) swap to Red
At layer #20 (1.68mm) swap to Yellow
At layer #22 (1.84mm) swap to White for the rest.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.