>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
Glowing Halloween Pumpkin Guts Night Light | 3D Printer Model Files
A gourd that oozes light from within, spilling a gooey, ghostly glow.
ATTENTION: This model requires super glue, a G9 socket/connector, a G9 LED lamp, and a cable with a plug compatible with your region. Read the assembly and safety checklist below before starting.
You Will Need:
Socket/Conector G9 - Amazon - AliExpress - Mercado Livre
LED Lamp G9 - Amazon - AliExpress - Mercado Livre
Assembly & electrical safety checklist
Digital model files only; no physical product is shipped. Electrical assembly should be completed and checked by a qualified electrician. This checklist is a planning guide, not a wiring diagram.
-
Gather the parts. Have your printed parts, super glue, G9 socket/connector, G9 LED lamp, and cable with a region-compatible plug ready. The socket and lamp links above are references, not confirmation that every available option is compatible.
-
Check compatibility before assembly. Confirm that the lamp has a G9 base, fits the chosen G9 socket, and fits inside the printed model. Have an electrician verify the supply, lamp, socket, cable, and plug ratings together. A matching plug shape or G9 base alone does not establish electrical or thermal compatibility.
-
Dry-fit with power disconnected. Check the fit of the printed parts, socket, lamp, and cable route before gluing. Stop if parts do not fit or the cable is pinched. Keep the assembly unplugged throughout assembly.
-
Stop before wiring. No verified wiring diagram or terminal sequence is provided here. Have a qualified electrician confirm the connection sequence, cable retention, and any earthing requirements, then make the connections according to the component manufacturers’ instructions. Do not guess wire connections.
-
Confirm joining and insulation. The earlier wording about “welding” or taping cables is not a verified connection method. Have the electrician select the appropriate joining method and insulation for the actual components. Joining and insulating are not interchangeable choices; do not treat electrical tape alone as a complete connection or super glue as electrical insulation.
-
Complete the safety check before use. Before final gluing or powering on, have the electrician check the connections, insulation, cable retention, and suitability for the printed enclosure. Stop if any ratings, heat clearances, or connections remain unverified. Do not power on until those checks are complete.
Owner confirmation needed: Supply voltage/frequency; exact compatible socket and G9 LED lamp models; permitted lamp wattage and heat limits; cable/plug ratings; wiring diagram and terminal sequence; approved joining/insulation method; cable retention and earthing requirements; and enclosure material, clearances, and ventilation requirements are not specified in this description. Confirm these before offering this as a complete electrical assembly guide.
- This STL file is recommended for FDM Printers!
3D PRINT FILE SETTINGS
- Recommended Layer Height: 0.16 mm (for the dragon), 0.20 mm (for the egg)
- Recommended Perimeters: 3.
- Recommended Infill (%): 5%
- Needs Support: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.