>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Grinch Leg Lamp | 3D Printer Model Files | How the Grinch Stole Christmas
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Filament Type PLA
- LED bulbs don't need heat resistance. (You can use Less Walls and Infill if you like.)
- Light Kit Optional light kit from Amazon
-
Scale 200%
BASE
- Line Width/ Nozzle: 0.4 mm
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.24 mm
- Recommended Perimeters/ Walls: 4
- Recommended Infill (%): 30% (Gyroidal)
LEG
- Line Width/ Nozzle: 0.4 mm
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.24 mm
- Recommended Perimeters/ Walls: 4
- Recommended Infill (%): 10% (Cubic)
SHADE
- Line Width/ Nozzle: 0.4 mm
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.24 mm
- Recommended Perimeters/ Walls: 2
- Recommended Infill (%): 10% (Cubic)
SHADE HOLDER
- Line Width/ Nozzle: 0.4 mm
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.24 mm
- Recommended Perimeters/ Walls: 4
- Recommended Infill (%): 35% (Gyrodial)
NOTES
Lamp was Disassembled. Wiring rerouted through the model and a 46.82mm wide by 22mm tall Cylinder with a 36.75mm center cutout was added (your measurements may vary based on scale) This is to fit the bulb housing. Then slide those into Shade Holder V2. (Not a Permanent Fit but snug fitted). You may use a more permanent setup but wanted to be able to disassemble and put away after with the rest of the Holiday Ornaments.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Grinch Leg Lamp | 3D Printer Model Files | How the Grinch Stole Christmas
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Filament Type PLA
- LED bulbs don't need heat resistance. (You can use Less Walls and Infill if you like.)
- Light Kit Optional light kit from Amazon
-
Scale 200%
BASE
- Line Width/ Nozzle: 0.4 mm
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.24 mm
- Recommended Perimeters/ Walls: 4
- Recommended Infill (%): 30% (Gyroidal)
LEG
- Line Width/ Nozzle: 0.4 mm
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.24 mm
- Recommended Perimeters/ Walls: 4
- Recommended Infill (%): 10% (Cubic)
SHADE
- Line Width/ Nozzle: 0.4 mm
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.24 mm
- Recommended Perimeters/ Walls: 2
- Recommended Infill (%): 10% (Cubic)
SHADE HOLDER
- Line Width/ Nozzle: 0.4 mm
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.24 mm
- Recommended Perimeters/ Walls: 4
- Recommended Infill (%): 35% (Gyrodial)
NOTES
Lamp was Disassembled. Wiring rerouted through the model and a 46.82mm wide by 22mm tall Cylinder with a 36.75mm center cutout was added (your measurements may vary based on scale) This is to fit the bulb housing. Then slide those into Shade Holder V2. (Not a Permanent Fit but snug fitted). You may use a more permanent setup but wanted to be able to disassemble and put away after with the rest of the Holiday Ornaments.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
