Jaguar Power Key Holder | 3D Printer Model Files

Jaguar Power Key Holder | 3D Printer Model Files

Your Price:

$18.73 $50.00

You Save: $31.27 63%

Only 15 left! 6 people are viewing this, and 11 recently purchased it

11 People have recently bought this

Hurry, Offer Ends in:

Days

Hours

Minutes

Seconds

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<

File Type: STL and 3MF

3D PRINT MODEL DESCRIPTION

Jaguar Power Key Holder | 3D Printer Model Files

This awesome key holder mechanism has shown up here before, but this time it has the full force of the jaguar power. And the multicolor option, of course. You’re not gonna miss that, are you?

This STL file is recommended for FDM Printers!
Approximately Height : 21 cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.12 mm
Recommended Layer Height: 0.12 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Shipping

This item ships to

Description

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<

File Type: STL and 3MF

3D PRINT MODEL DESCRIPTION

Jaguar Power Key Holder | 3D Printer Model Files

This awesome key holder mechanism has shown up here before, but this time it has the full force of the jaguar power. And the multicolor option, of course. You’re not gonna miss that, are you?

This STL file is recommended for FDM Printers!
Approximately Height : 21 cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.12 mm
Recommended Layer Height: 0.12 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.