Your Cart ()
cload

GUARANTEED SAFE & SECURE CHECKOUT

Skull Rock Band Drummer Figure | 3D Printer Model Files

Your Price:
$18.73 $50.00
You Save: $31.27 63%
Add to wishlist
Checkout Secure
Only 13 left! 9 people are viewing this, and 12 recently purchased it
12 People have recently bought this

Hurry, Offer Ends in:

0
Days
0
Hours
0
Minutes
0
Seconds

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<

File Type: STL and 3MF

3D MODEL DESCRIPTION


I don’t know about you, but for me, this guy looks a bit drummatic.


Assembling Instructions:
 

  • Take GEAR_1 and tighten the spring with your fingers as shown in the video, and place it inside BODY, fitting the outer hole of the spring onto the pin inside BODY.
  • Fit GEAR_3 onto GEAR_2 and attach it on top of GEAR_1 so that GEAR_3 is facing downwards.
  • From the outside, thread GEAR_8 so that the pin goes through the holes of the aligned gears on the inside.
  • Attach GEAR_4 onto the pin of BODY.
  • Attach GEAR_5 onto the top of GEAR_3, through the pin of GEAR_8.
  • Place GEAR_6 on top of GEAR_4.
  • Fit CHEST_PLATE on top of everything, aligning the pins with the holes and the slots on the side, as shown in the video.
  • Put GEAR_7 over CHEST_PLATE, fitting it onto the first pin.
  • Attach CHEST_ELIPSE so that the inner diameter touches GEAR_7, as shown in the video.
  • Fit CHEST_ELIPSE_SLIDER below CHEST_ELIPSE, in its designated space.
  • Finish by attaching and gluing the remaining parts

 

  • This STL file is recommended for FDM Printers!
  • Approximately Height: 26cm


3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)


  • Line Width/ Nozzle: 0.4 mm
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
  • Recommended Initial Layer Height:  0.12 mm
  • Recommended Layer Height:  0.12 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: No.
  • Build Plate Adhesion: None.

 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Shipping This item ships to

Description

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<

File Type: STL and 3MF

3D MODEL DESCRIPTION


I don’t know about you, but for me, this guy looks a bit drummatic.


Assembling Instructions:
 

  • Take GEAR_1 and tighten the spring with your fingers as shown in the video, and place it inside BODY, fitting the outer hole of the spring onto the pin inside BODY.
  • Fit GEAR_3 onto GEAR_2 and attach it on top of GEAR_1 so that GEAR_3 is facing downwards.
  • From the outside, thread GEAR_8 so that the pin goes through the holes of the aligned gears on the inside.
  • Attach GEAR_4 onto the pin of BODY.
  • Attach GEAR_5 onto the top of GEAR_3, through the pin of GEAR_8.
  • Place GEAR_6 on top of GEAR_4.
  • Fit CHEST_PLATE on top of everything, aligning the pins with the holes and the slots on the side, as shown in the video.
  • Put GEAR_7 over CHEST_PLATE, fitting it onto the first pin.
  • Attach CHEST_ELIPSE so that the inner diameter touches GEAR_7, as shown in the video.
  • Fit CHEST_ELIPSE_SLIDER below CHEST_ELIPSE, in its designated space.
  • Finish by attaching and gluing the remaining parts

 

  • This STL file is recommended for FDM Printers!
  • Approximately Height: 26cm


3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)


  • Line Width/ Nozzle: 0.4 mm
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
  • Recommended Initial Layer Height:  0.12 mm
  • Recommended Layer Height:  0.12 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: No.
  • Build Plate Adhesion: None.

 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Shipping

Shipping This item ships to
Skull Rock Band Drummer Figure | 3D Printer Model Files

Skull Rock Band Drummer Figure | 3D Printer Model Files

$18.73 $50.00
Add to wishlist
Skull Rock Band Drummer Figure | 3D Printer Model Files

Skull Rock Band Drummer Figure | 3D Printer Model Files

Your Price:
$18.73 $50.00
You Save: $31.27 63%
Truth Social
9 visitors right now
9 visitors have this item in their cart right now
12 people have bought this item
29 % of people buy 2 or more
Hello Kitty Sitting | Best 3D Printing STL Model Files...
Someone purchased a 32 minutes ago from St. Louis, USA
Hello Kitty Roly Poly Toy | Best 3D Printing STL...
Someone purchased a 21 minutes ago from Chicago, USA
Hello Kitty Rubber Duck | Best 3D Printing STL Model...
Someone purchased a 17 minutes ago from San Diego, USA
Julius Caesar Knife Block Pen Holder | Complete Set |...
Someone purchased a 42 minutes ago from Kansas City, USA
Julius Caesar Pen Holder | Best 3D Printing STL Models...
Someone purchased a 41 minutes ago from Hartford, USA
Stitch | Teddy Bear | Best 3D Printing STL Models...
Someone purchased a 18 minutes ago from Orlando, USA
Bear Love Umbrella Balloon | Complete Set | Best 3D...
Someone purchased a 31 minutes ago from Dallas, USA
Bear Flying with Balloon | Best 3D Printing STL Model...
Someone purchased a 12 minutes ago from Boston, USA
Lady Bear Dancing with Umbrella | Best 3D Printing STL...
Someone purchased a 20 minutes ago from Miami, USA
Petter Cottontail Balloon Powered | Best 3D Printing STL Model...
Someone purchased a 1 minute ago from Key West, USA
Rocketman Launching to the Moon | Best 3D Printing STL...
Someone purchased a 2 minutes ago from Atlanta, USA
Bunny Rabbit Fishing on the Moon | Best 3D Printing...
Someone purchased a 47 minutes ago from Birmingham, USA
Complete Set | Yoda Hut Luke X-Wing | Diorama |...
Someone purchased a 6 minutes ago from Fort Worth, USA
Luke Crashed X-Wing | Yoda Dagobah Star Wars | 3D...
Someone purchased a 17 minutes ago from Nashville, USA
Yoda's Hut in Dagobah | Star Wars | 3D Printing...
Someone purchased a 57 minutes ago from Cleveland, USA
Homer Simpson Statue | 3D Printing STL Model Files
Someone purchased a 53 minutes ago from Indianapolis, USA
Wolverine Mini | Marvel Comics Universe | 3D Printing STL...
Someone purchased a 41 minutes ago from Springfield, USA
Iron Man Statue | Marvel Comics Universe | 3D Printing...
Someone purchased a 29 minutes ago from Jefferson City, USA
Darth Vader Mini | Star Wars | 3D Printing STL...
Someone purchased a 59 minutes ago from Seattle, USA
Stitch Figure | 3D Printing STL Model Files
Someone purchased a 8 minutes ago from Montgomery, USA
9 Visitor Right Now
9 visitors have this item in their cart right now
Only 13 left! 9 people are viewing this, and 12 recently purchased it
12 People have recently bought this
mgctlbxN$MZP mgctlbxV$5.2.5 mgctlbxL$C