Your Cart ()
cload

GUARANTEED SAFE & SECURE CHECKOUT

Mariachi Coat Hanger | 3D Printer Model Files

Your Price:
$18.73 $50.00
You Save: $31.27 63%
Add to wishlist
Checkout Secure
Only 3 left! .. people are viewing this, and 3 recently purchased it
3 People have recently bought this

Hurry, Offer Ends in:

0
Days
0
Hours
0
Minutes
0
Seconds

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<

File Type: STL and 3MF

3D MODEL DESCRIPTION
 
This coat guardian is always in a good mood.
 

  • This STL file is recommended for FDM Printers!
  • Approximately Height : 19,5 cm
     


1) Fit both Left Bigger Gear and Right Bigger Gear into the Box with the doors closed;
2) Put the Hook inside the Box up to the marking;
3) Place Screw 1 and Screw 2 inside Smaller Gear 1 and Smaller Gear 2 respectively, then place both inside the Box
4) After placing both Smaller Gears inside the Box, secure them in with your hands while you attach Washer 1 and Washer 2 from the outside on the back of the model;
5) Glue the Mariachi’s slot into the hook and the other one on the box. 

 
 

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)


  • Line Width/ Nozzle: 0.4 mm
  • First Layer Line Width: 0.48 mm / 120%
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)  | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
  • Recommended Initial Layer Height:  0.16 mm
  • Recommended Layer Height:  0.16 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: No.
  • Build Plate Adhesion: Skirt.

 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Shipping This item ships to

Description

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<

File Type: STL and 3MF

3D MODEL DESCRIPTION
 
This coat guardian is always in a good mood.
 

  • This STL file is recommended for FDM Printers!
  • Approximately Height : 19,5 cm
     


1) Fit both Left Bigger Gear and Right Bigger Gear into the Box with the doors closed;
2) Put the Hook inside the Box up to the marking;
3) Place Screw 1 and Screw 2 inside Smaller Gear 1 and Smaller Gear 2 respectively, then place both inside the Box
4) After placing both Smaller Gears inside the Box, secure them in with your hands while you attach Washer 1 and Washer 2 from the outside on the back of the model;
5) Glue the Mariachi’s slot into the hook and the other one on the box. 

 
 

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)


  • Line Width/ Nozzle: 0.4 mm
  • First Layer Line Width: 0.48 mm / 120%
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)  | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
  • Recommended Initial Layer Height:  0.16 mm
  • Recommended Layer Height:  0.16 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: No.
  • Build Plate Adhesion: Skirt.

 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Shipping

Shipping This item ships to
Mariachi Coat Hanger | 3D Printer Model Files

Mariachi Coat Hanger | 3D Printer Model Files

$18.73 $50.00
Add to wishlist
Mariachi Coat Hanger | 3D Printer Model Files

Mariachi Coat Hanger | 3D Printer Model Files

Your Price:
$18.73 $50.00
You Save: $31.27 63%
3 visitors right now
3 visitors have this item in their cart right now
3 people have bought this item
3 % of people buy 2 or more

Recently viewed products