>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Stitch Planter Flower Pot | Best 3D Printing Model Files at Sethers
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
You can print this Planter Water Tight with PLA with the following settings:
Layer Walls: 7
Parameters: 7
Top/bottom: 7
Nozzle Temp: Increase by 10 from normal max temp for filament.
Extrusion Multiplier: Increase by 10% of default value.
Layer Height: 0.15mm
Overlap: 35%
Infill: 15% is fine as long as parameter is 7.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D MODEL DESCRIPTION
Stitch Planter Flower Pot | Best 3D Printing Model Files at Sethers
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
You can print this Planter Water Tight with PLA with the following settings:
Layer Walls: 7
Parameters: 7
Top/bottom: 7
Nozzle Temp: Increase by 10 from normal max temp for filament.
Extrusion Multiplier: Increase by 10% of default value.
Layer Height: 0.15mm
Overlap: 35%
Infill: 15% is fine as long as parameter is 7.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
